To load a Capture Drive lift the drive port cover at the front of the Action Cam recorder. Slide the Capture Drive into the port (with cooling ridges facing upwards) and push so that the connector is fully mated. Close the drive port cover to complete the loading process. The word “LOADING” will be shown on the screen. The LED on the Capture Drive will flash blue whilst it loads, and turn off when it finishes loading.
To unload a Capture Drive lift the drive port cover. The word “UNLOADING” will be shown on the screen and the LED will begin flashing blue. The Capture Drive will be ejected the word “REMOVE” will be shown on the screen. The LED will become solid blue, meaning it is safe to pull the Capture Drive out of the drive port.
(WARNING - damage may occur to the Capture Drive if it is removed before the LED is solid blue)
